English
| Quantity: |
|---|
E308LT1-1
FARINA
Introduction:
FRN-E308LT1-1 is a kind of gas shielded stainless steel flux cored wire, soft and stable arc, lower spatter, beautiful appearance, easy to slag removal, it has good welding performance and all position welding. The deposited metal has excellent mechanical properties and intercrystalline corrosion-resistance
Uses:
Used for welding corrosion-resistant 06Cr19Ni10, 07Cr19Ni11Ti stainless steel structures and the working temperature should be below 300℃. It used for welding 301,302,304,301L, 308,308L and other stainless steel materials.
Shielding Gas is Co2
Standard: ASTM,JIS,EN,ISO
Diameter: 1.2mm,1.4mm,1.6mm
Packing: 5Kgs,12.5KGs weight per reel
Chemical Composition of Deposited Metal (%) (CO2 Shielding Gas)
Test Item | C | Mn | Si | Ni | Cr |
Guarantee Value | ≤0.04 | 0.50~2.50 | ≤1.00 | 9.0~11.0 | 18.0~21.0 |
General Result | 0.029 | 1.40 | 0.36 | 10.3 | 19.33 |
Test Item | S | P | |||
Guarantee Value | ≤0.030 | ≤0.040 | |||
General Result | 0.003 | 0.023 | |||
Mechanical Properties of Deposited Metal
Test Item | Rm(N/mm2) | A (%) |
Guarantee Value | >=520 | >=35 |
General Result | 550 | 43.5 |
Introduction:
FRN-E308LT1-1 is a kind of gas shielded stainless steel flux cored wire, soft and stable arc, lower spatter, beautiful appearance, easy to slag removal, it has good welding performance and all position welding. The deposited metal has excellent mechanical properties and intercrystalline corrosion-resistance
Uses:
Used for welding corrosion-resistant 06Cr19Ni10, 07Cr19Ni11Ti stainless steel structures and the working temperature should be below 300℃. It used for welding 301,302,304,301L, 308,308L and other stainless steel materials.
Shielding Gas is Co2
Standard: ASTM,JIS,EN,ISO
Diameter: 1.2mm,1.4mm,1.6mm
Packing: 5Kgs,12.5KGs weight per reel
Chemical Composition of Deposited Metal (%) (CO2 Shielding Gas)
Test Item | C | Mn | Si | Ni | Cr |
Guarantee Value | ≤0.04 | 0.50~2.50 | ≤1.00 | 9.0~11.0 | 18.0~21.0 |
General Result | 0.029 | 1.40 | 0.36 | 10.3 | 19.33 |
Test Item | S | P | |||
Guarantee Value | ≤0.030 | ≤0.040 | |||
General Result | 0.003 | 0.023 | |||
Mechanical Properties of Deposited Metal
Test Item | Rm(N/mm2) | A (%) |
Guarantee Value | >=520 | >=35 |
General Result | 550 | 43.5 |
English
